WALL COPINGS IN MARMORESINA

supplyof coping stones for parapets and perimeter wall with and inverted U- shaped cross.section whit a flat surface and a thichness of 20 mm suitable for the protection on the parapet or wall beneath...

supplyof coping stones for parapets and perimeter wall with and inverted U- shaped cross.section whit a flat surface and a thichness of 20 mm suitable for the protection on the parapet or wall beneath them. Composed and made from the misture of types of marble dust with specific resins and adhesives.Surface coated with special chemical enamels to enhance colour, at the same time increasing resistance to adverse weather conditions. The internal support srface has longitudinal grooves impressed obliquely with respect to the vertical axis, such as to permit suitable adherence compound (TYPE C2TE S2) and Therefore to prevent the detachment of the component. The cross - section of the lateral lip is chamfered on both the internal and external sides of the wall . the purpose of the internal chamfer is to the facility installation . The purpose of the external chamfer is to act as a drip moulding, so as to keep drips of rainwater falling onto the coping and draining off it away from the wall . the total height of the coping is 60 mm , and its lenght is 1000/1200 mm. The consistency of the component is guaranteed by a high specific weight of no less than 2100 kg/m3.

Leer más Ver menos